ADVANTAGE Base 1Laser Companion, Unique extractors designed to allow manufacturer's laser engravers to sit on top of the units.

Other related extractors in the ADVANTAGE range:

AD Base 1 | AD Base 3 | AD Base Z | AD Base C180

AD Base 1

The Laser Companion range has been designed so that a number of manufacturer's laser engravers can sit on top of the extractor, effectively doubling it up as a work station.

Both of the 2 units in the range has the option of an onboard compressor for a compact installation. The AD Base 1 unit benefit from manual speed control. BOFA's Easi-Glide filter location mechanism makes filter change easy, quick and safe.

Blower with high airflow and pressure
Filters with long life and low replacement cost
Easi-Glide filter location mechanism
Noise levels less than 60dBa
Optional VOC gas sensors
Advanced stop/start interface

Technical Drawing
Components Diagram
Part Numbers
Technical Data
Filters
Hose Kits

AD Base 1 Technical Drawing

Components Diagram

1. Unit/Filter Condition Display
2. On/Off Switch
3. Filter Housing Cam Latch
4. Extracted Air Outlet
5. Hose Inlet Connection 100mm
6. Signal/ Interface Cable to Laser
7. Power Cable
8. Motor Cooling Inlet
9. Motor Cooling Outlet
10. Compressed Air Outlet
11. Castors
12. Door Hinges
13. Machine Identification

PART NUMBERS
Model			24V Stop / Start	Filter change / System failure signal	VOC Monitoring	Compressor	Automatic Closed Loop Flow Control System
AD Base 1	230V	L1042A	A2001	A2002	A2003	A2007	A2006
AD Base 1	115V	L1041A	A2001	A2002	A2003	A2007	A2006

All of the above units are fitted with our standard filter combinations. For specific applications please contact us direct.

REPLACEMENT FILTERS
Model	Pre Filter	2nd Pre Filter	HEPA filter	Disposable Gas Filter 50L	Refillable Gas Filter Tray	25kgs Refill Bag of Carbon	Combined Filter
AD Base 1	A1030077	N/A	A1030078	A1030061	A1030063	A1030064	N/A

* Other Filters are available. Please call us for details. N/A = Not Applicable

TECHNICAL DATA
Model	AD Base 1
Model	EC	US
Dimensions (hxwxd)	805 x 695 x 675mm	31.7 x 27.4 x 26.6"
Weight	86kg	189lbs
Cabinet Construction	Powder coated mild steel	Powder coated mild steel
Blower	1.1kw 400m³/hr	1.1kw 235cfm
Electronics	230v 50/60Hz Full load current:7.2 amps	115v 50/60Hz Full load current:14.4 amps

* At typical operating speed.

FILTER SPECIFICATION
	Pre Filter	HEPA Filter	Gas Filter
Part Number	A1030077	A1030078	A1030061
Filter Media	Polyester	Glass Fibre	Impregnated Carbon 25kg
Surface Area	2.2m²	7.5m²	N/A
Construction	8 Pocket	Maxi Pleat	Granules
Housing	Polyester	Mild Steel	Mild Steel
Efficiency	EU6 (85% @ 0.8 microns)	H13 (99.997% @ 0.3 microns)	N/A

AD BASE 1 Pre Filter

AD BASE 1 Gas & HEPA Filter

Hose Kits
Model	Hose Kit*	Hose Kit*
AD Base 1	A1020020 - 100-100mm kit	A1020010 - 100-75mm kit

* Other Hose Kits are available.

Hose Kits.

Part Number: A1020020

1 - 1.5m 100mm Flexible Hose
2 - Connection Cuffs
Part Number: A1020017

1 - 1.5m 75mm Flexible Hose
2 - Connection Cuffs

Part Number: A1020010

1 - 1.5m 100mm Flexible Hose
2 - Connection Cuffs
3 - 100 - 75mm Reducer
Part Number: A1020050

1 - 1.5m 100mm Flexible Hose
2 - Connection Cuffs
3 - 75mm - 100 Reducer