ADVANTAGE Base ZFor use with the Epilog Zing Laser Engraver.

Other related extractors in the ADVANTAGE range:

AD Base 1 | AD Base 3 | AD Base Z | AD Base C180

AD Base Z

The Advantage Base Z has been designed specifically for the new Epilog Zing laser engraver. The dimensions of the unit allow the Zing to fit perfectly onto the extractor, effectively doubling it up as a work station. The distinctive blue finish has been matched with the blue ends of the laser to give a stylish installation. The unit is also offered with an onboard air compressor to provide the laser its air assist requirements. All units come complete with extraction hose kit and compressor link up on compressor models.

Noise Level less than 55dBa
Low cost replacement filters
Stylish colour match with Zing
On Board compressor versions
Comes complete with extraction hose kit
Reverse flow filter technology

Technical Drawing
Components Diagram
Part Numbers
Technical Data
Filters
Hose Kits

AD Base Z Technical Drawing

Components Diagram

PART NUMBERS
Model			VOC Monitoring	Compressor
AD BASE Z	230V	L1542A	A2003	A2007
AD BASE Z	115V	L1541A	A2003	A2007

All of the above units are fitted with our standard filter combinations. For specific applications please contact us direct.

REPLACEMENT FILTERS
Model	Pre Filter	Combined Filter
AD BASE Z	A1030045	A1030050

* Other Filters are available. Please call us for details. N/A = Not Applicable

TECHNICAL DATA
Model	AD Base Z
Model	EC	US
Dimensions (hxwxd)	770 x 760 x 560mm	30.3 x 29.9 x 22"
Weight	65kg	143lbs
Cabinet Construction	Powder coated mild steel	Powder coated mild steel
Blower	200m3/hr	117cfm
Electronics	230v 50/60Hz Full load current: 3.7 amps	115v 50/60Hz Full load current: 1.2 amps

* At typical operating speed.

FILTER SPECIFICATION
	Pre Filter	Combined Filter
Filter Media	Glass Fibre	Glass Fibre, Activated Carbon 9kg
Surface Media	12m²	2m²
Conctruction	2 Stage Maxi Pleat	Metal Case
Housing	MDPE Moulding	Mild Streel
Efficiency	EU8 (95% @ 0.8 micon)	H13 (99.997% @ 0.3 micon) Multiple Gas