BOFA International Ltd | ADVANTAGE BASE C180 - Laser Fume Extraction Systems for Soldering, Electronics, Printing and Mechanical Engineering

Home

Products	Enquiry Form	Distributors	About Us
Latest News	Service / Maintenance	Downloads	Contact Us
Testimonials	Legislation (Health & Safety)	Employment	Links

ADVANTAGE BASE C180

For use with the GCC C180 Laser Engraver.

Noise Level less than 55dBa
Filters with long life and low replacement costs.
Stylish colour match with C180
On Board compressor versions
Comes complete with extraction hose kit

The Advantage Base C180 has been designed specifically for the new GCC C180 laser engraver. The dimensions of the unit allow the C180 to fit perfectly onto the extractor, effectively doubling it up as a work station. The distinctive blue finish has been matched with the silver of the laser to give a stylish installation. The unit is also offered with an onboard air compressor to provide the laser its air assist requirements. All units come complete with extraction hose kit and compressor link up on compressor models.

PART NUMBERS
Model			VOC Monitoring	Compressor
AD BASE C180	230V	L2142A	A2003	A2007
	115V	L2141A

REPLACEMENT FILTERS AND ACCESSORIES*
Model	Pre Filter	Combined HEPA / Gas Filter
AD BASE C180	A103007	A1030050
* Other Filters are available. Please call us for details.

TECHNICAL DATA
Model	AD BASE C180
	EC	US
Dimensions (hxwxd)	795 x 720 x 675mm	31.3 x 28.3 x 26.6"
Weight	86kg	190lbs
Cabinet Construction	Powder coated mild steel	Powder coated mild steel
Blower	135w	135w
Electronics	230v 50/60Hz Full load current: 2.7 amps	115v 50/60Hz Full load current: 1.2 amps

FILTER SPECIFICATION
Model	AD BASE C180
Model	Pre Filter	Combined Filter
Part Number	A1030077	A1030050
Filter Media	Polyester	Glass Fibre, Activated Carbon 9kg
Surface Media	2.2m²	2m²
Conctruction	8 Pocket	Metal Case
Housing	Polyester	Mild Streel
Efficiency	EU6 (85% @ 0.8 microns)	H13 (99.997% @ 0.3 micons) Multiple Gas

AD BASE C180 Pre Filter

AD BASE Z Pre Filter

AD BASE C180 Combined Filters

AD BASE Z Combined Filter

COMPONENTS DIAGRAM
BASE C180
1. Unit/Filter Condition Display 2. On/Off Switch 3. Filter Housing Cam Latch 4. Extracted Air Outlet 5. Hose Inlet Connection 100mm 6. Signal/ Interface Cable to Laser 7. Power Cable	8. Motor Cooling Inlet 9. Motor Cooling Outlet 10. Compressed Air Outlet 11. Castors 12. Door Hinges 13. Machine Identification

Download a brochure

Product Information

Specifications BASE C180

Dimensions (h x w x d)
795 x 720 x 675mm
(31.3 x 28.3 x 26.6")
Weight
86kg 190lbs
Cabinet Construction
Powder coated mild steel
Blower
135w
Electronics
230v 50/60Hz (115v 50/60Hz)