BOFA International Lld | Electronics Section Accessories - Laser Fume Extraction Systems for Soldering, Electronics, Printing and Mechanical Engineering

Home

Products	Enquiry Form	Distributors	About Us
Latest News	Service / Maintenance	Downloads	Contact Us
Testimonials	Legislation (Health & Safety)	Employment	Links

Accessories
High Volume Accessories.

BOFA offer a wide range of volume LEV extraction accessories. From extraction arms with diameters of 32mm for intricate soldering up to 75mm arms for heavy duty applications such as transformer production. Down draft trays and table top cowls for specific production demands are also available.

PART NUMBERS
1	A1020044	32mm ESD Stay Put Arm with Funnel
2	A1020046	32mm ESD Stay Put Arm with Nozzle
3	A1020045	50mm ESD Stay Put Arm with Funnel
4	A1020047	50mm ESD Stay Put Arm with Nozzle
5	A1020049	50mm ESD Stay Put Arm with Slot
6	A1020042	75mm ESD Stay Put Arm Unit Mounted
7	A1020043	75mm ESD Stay Put Arm with Bench Bracket
8	A1020037	50mm ESD Cowl
9	A1020036	50mm Clear Cowl
10	A1020039	75mm ESD Cowl
11	A1020038	75mm Clear Cowl
12	A1020040	50mm ESD Down Draft Tray
13	A1020041	75mm ESD Down Draft Tray
14	A1020051	Table Bracket for 32mm and 50mm
15	A1020052	Automatic Flush System Seal for 32mm and 50mm

2. 1.

5. 4. 3.

7. 6.

8. 9.

10. 11.

12. 13.

14. 15.

50mm Stay Put Arms. The arms are made of black carbon loaded compressed polystyrene construction.
A1020045 50mm Stay Put Arm with funnel 790mm in length, funnel 100mm in diameter.	A1020047 50mm Stay Put Arm with nozzle 790mm in length, nozzle has a 90 degree slant and is 40mm in diameter.	A1020049 50mm Stay Put Arm with slot 790mm in length, fish tail across and 25mm wide.

Diagrams above highlight the capture area of the stay put arms when extracting at a flow rate of 60m³/hr (darker shading) and 100m³/hr. These measurements were taken with the arm situated above the working area.

Diagrams above highlight the capture area of the stay put arms when extracting at a flow rate of 60m³/hr (darker shading) and 100m³/hr. These measurements were taken with the arm resting on the work surface.

50mm Cowls and Down-Draft Trays. The 50mm cowls are made of black conductive H.I polystyrene construction. The clear 50mm cowls are made from clear PTG plastic. The 50mm downdraft tray carcass is made of condutctive H.I polystyrene. The tray is stainless steel.

CCC50ESD 50mm Black ESD Cowl CCC50 50mm Clear Cowl					DDTT50 50mm Downdraft Tray
The capture area of the 50mm cowl is taken from in front of the cowls, shown above. The height of the capture area is 100mm. 50mm cowl dimensions: 350 x 200 x 120mm (wxdxh).					The capture area is equal to the size of the stainless steel tray, which is 290 x 200mm. The tray will also capture fumes up to 100mm above the tray. 50mm downdraft tray dimensions: 360 x 310 x 75mm (wxdxh).

32mm and 75mm Stay Put Arms. The arms are made of black carbon loaded compressed polystyrene construction.
A1020046 32mm Stay Put Arm with nozzle, 750mm in length, nozzle has a 90 degree slant and is 30mm in diameter.	A1020044 32mm Stay Put Arm with funnel750mm in length, funnel is 75mm in diameter.	A1020043 75mm Stay Put Arm with funnel 950mm in length, funnel 160mm in diameter.

Diagrams above highlight the capture area of the stay put arms when extracting at a flow rate of 30m³/hr (darker shading) and 50m³/hr for 32mm arms and 120m³/hr (darker shading) and 190m³/hr for 75mm arms. These measurements were taken with the arm situated above the working area.

Diagrams above highlight the capture area of the stay put arms when extracting at a flow rate of 30m³/hr (darker shading) and 50m³/hr for 32mm arms and 120m³/hr (darker shading) and 190m³/hr for 75mm arms. These measurements were taken with the arm resting sideways on the work surface.

75mm Cowls and Down-Draft Trays. The 75mm cowls are made of black conductive H.I polystyrene construction. The clear 75mm cowls are made from clear PTG plastic. The 75mm downdraft tray carcass is made of aluminium. The tray is stainless steel.

CCC75ESD 75mm Black ESD Cowl CCC75 75mm Clear Cowl					DDTT75 75mm Downdraft Tray
The capture area of the 75mm cowl is taken from in front of the cowls, shown above. The height of the capture area is 160mm. 75mm cowl dimensions: 560 x 180 x 180mm (wxdxh).					The capture area is equal to the size of the stainless steel tray, which is 340 x 255mm. The tray will also capture fumes up to 100mm above the tray. 75mm downdraft tray dimensions: 360 x 430 x 90mm (wxdxh).

PART NUMBERS
B	A1090006	Metal Iron Conversion Kit for 002/SP200 iron connector, ESD silicone tube, fasteners and cleaning brush.
C	A1090008	Weller Mini Iron Conversion Kit iron clip on kit, stainless steel tube, ESD silicone tube, fasteners, cleaning brush.
D	A1090007	Adcola, Weller, Pace + (fits most other irons), iron clip on kit, stainless steel tube, ESD silicone tube, fasteners, cleaning brush and holder.
E	A1090001	ERSA Tip Tool Iron Connector, stainless steel tube, ESD silicone tube, fasteners, cleaning brush.
F	A1090002	ERSA Micron Tool Iron Connector, stainless steel tube, ESD silicone tube, fasteners, cleaning brush.
G	A1090003	ERSA Ergo Tool, Tech Tool, Power Tool, Iron Connector, stainless steel tube, ESD silicone tube, fasteners, cleaning brush.
H	A1090004	Hakko Iron Connector, stainless steel tube, ESD silicone tube, fasteners, cleaning brush.
I	A1090010	Hakko Iron Connector, stainless steel tube, ESD silicone tube, fasteners, cleaning brush.

Download a brochure

Product Information

ACCESSORY PRODUCTS

Product Datasheet

ACCESSORIES

Download a brochure

Call Us

	T: +44 (0)1202 699444 F: +44 (0)1202 699446
	E: info@bofa.co.uk

Download a brochure